Bicycle Central Turning Point - Workshop

At Bicycle Central Turning Point we offer a full range of services and repairs. Our aim is to get your bike back in tip top working order as soon as possible and back to you. Servicing is an essential part of keeping you on the road and extending the life of bicycle components. We also have a bike wash to keep your machine looking its best.

Our Workshop Team is ready to help with advice and quality workmanship.

For any servicing questions please call us or email us on:

Phone: 03) 9580 5175
Email: TurningPoint@Bicycle-Central.com.au


Silver Service - $70
Gold Service - $139
Platinum Service - $220

 

Silver Service

•    Check all components for wear
•    Gear Adjustment
•    Brake Adjustment
•    Inflation of Tyres to Correct Pressure
•    Drive Train lubrication
•    Safety Inspection
•    Bike wash
Recommended for bikes in good condition between annual services.
Cost: $79.00

 

Gold Service

•    Check all components for wear
•    Gear Adjustment
•    Brake Adjustment
•    Inflation of Tyres to Correct Pressure
•    Drive Train lubrication
•    Safety Inspection
•    Bike Wash
•    Check & True wheels
•    Adjust Head Fittings
•    Adjust Bottom Bracket
•    Adjust Hub bearings
This is the service recommended annually or for bikes in dirty condition.
Cost: $139

 

Platinum Service

•    Check all components for wear
•    Gear Adjustment
•    Brake Adjustment
•    Inflation of Tyres to Correct Pressure
•    Drive Train lubrication
•    Safety Inspection
•    Bike Wash
•    Check & True wheels
•    Check & Adjust Head Fittings
•    Check & or adjust Bottom Bracket
•    Check & or adjust Hub Cones
•    Re-Grease Hubs
•    Re-Grease Bottom Bracket
•    Re-Grease Head Fittings
•    Check and lube Brake Cables
•    Check and lube Gear Cables
This service is recommended every two years and will extend the life of your bicycle.
Cost: $220

 

BIKE WASH (includes degrease and lubrication) - $30

TYRE/TUBE FITTING - $20 per tyre/tube

PUNCTURE REPAIR - $20 per puncture

 

PART FITTING

At Turning Point Cycles we strongly recommend that you source your parts for your bike from a local distributor via us.  This affords you the assurance of the fact that the part is a genuine quality item that will fit and work as it is designed to on your bike.  You also have the security of a warranty with parts.  If the part fails within the warranty period you can bring it back to us.  If you purchase the part from us as part of a bike service then fitting of the part is included for FREE!  (some exclusions apply).  However, if you do choose to bring your parts to us then we will fit them at an additional cost.

FITTING COSTS

Tyre/Tube Fitting $20 per end

Chain Fitting $15 (connector pins not included)

Cassette Fitting $15

Bottom Bracket Fitting $25

Crank Installation $25

Gear/Brake Cable $15 per cable ($20 for internal cabling)

Brake/Disc Pad Installation $15 per brake

Gear Brake Lever Installation $20 per lever

Pedal Fitting $15 (does not include cleat and seat height adjustment)

Derailleur Fitting $25 per derailleur

Bar Tape Fitting $25

Wheel Fitting $15 per wheel

 

PART COMPATIBILITY ADVICE

If you are not sure what parts you need, we offer a service whereby we can guide you as best as possible as to what part will work on your bike.  You bring your bike to us and we can guide as to the suitability of a part. There is no guarantee or warranty offered with this service.  Technical advice on the installation and adjustment of the part is also NOT offered.  It's simply advice on will it fit and will it work.  Fitting of the part is then charged at the above rates.  The cost of this service is $30 (30 minutes maximum advice time) for which you can ask us about any part.  Please take into account that determining the compatibility of a part can take some time including consultation of detailed technical documents.